Free printable · September 29, 2026
Will your charging stand fit iPhone Duo?
Print the open and folded outside dimensions at actual size. Put the paper against a stand or shelf to spot obvious overhang and clearance problems before you buy another charger.
Three-minute check
Use US Letter paper in landscape. Choose 100% or actual size. Turn off “fit to page.”
The calibration line must be exactly 100 mm (3.94 in). If it is not, fix print scaling first.
Cut out the outlines if useful. Hold them against your stand in both positions and check edges, nearby supports and viewing angle.
What this can and cannot tell you: These are Apple's outside dimensions, not a device replica. The paper does not show camera bump, hinge geometry, charging coil location, case thickness, magnet strength, weight balance or actual charge speed. A fit on paper is a reason to investigate further, never a compatibility guarantee.
6.48 × 4.64 in
3.31 × 4.64 in
External rectangle only. Not a charging coil, camera, hinge or case template. Verify with a real device after release.
What to do with the result
If the outline visibly collides with a stand arm or shelf, wait for a tested fit report. If it clears, check whether the pad reaches the charging area and supports the Duo securely in the posture you use. A flat MagSafe pad avoids stand geometry, but magnetic alignment and actual fit still need checking with the device.
Need a wired charger first? Apple's fastest published result uses a 60W-capable or higher USB-C adapter, and the Duo includes a 1 m USB-C charge cable. Browse the charging shop for adapter, MagSafe and Qi2 options.
Source: Apple iPhone Duo technical specifications, Size and Weight, Power and Battery, and In the Box. No hands-on fit tests have been performed. The connected shop contains affiliate links that may earn a commission at no additional cost to you. Not affiliated with Apple.